lipo battery, lipo battery storage, RC DRIVERS, RC HELICOPTER, rc Pilots, sypom, sypom batteries -

Your LiPo Battery Won't Charge?

Your LiPo Battery Won't Charge?

Lithium polymer or LiPo batteries are frequently utilized in battery packs. The recognition of LiPo batteries has lately elevated as each battery produces 3.7 volts in comparison to at least one.2 volts for nickel cadmium and nickel metal hydride batteries.

What this means is less batteries are necessary to energy your electrical device, which makes it lighter. If you discover your LiPo battery will not charge, complete a few tests before determining to dump it and buying a alternative.

  1. Look at your LiPo charger to ascertain if it's working. Place the LiPo battery in to the charger and switch it on. Let it rest for around 30 minutes.
  1. Switch off the charger, after which touch the charger to ascertain if it's warm. Battery chargers produce warmth while charging batteries. Touch the LiPo battery to ascertain if it's warm as the entire process of charging causes battery to warmth. When the charger is warm, however the battery is not, you will want a alternative battery.

When the charger is cold your charger needs repairing or changing. When the charger and also the battery are warm take away the battery in the charger and set it within the device it forces.

  1. Switch on your device to ascertain if battery has any energy. Whether it does not operate, switch the battery. When the device works, although not in the correct energy, turn it on until it stops operating. Leave battery to awesome.
  1. Switch on the unit again after 30 minutes. After resting, batteries can restore some energy, therefore if your device works, turn it on until it stops. Allow the battery relaxation for some time and do this again until your device will not work.
  1. Place your battery in to the charger and allow it to charge. The entire process of fully discharging your battery can totally reset caffeine composition and when fully released charges you properly. Leave battery charging before the charger turns off instantly.
  1. Take away the 11.1v battery in the charger and set it to your device. Switch on your device to locate when the battery has billed fully. If you discover no improvement then switch the battery.